holoscan-sensor-bridge▌

Clone the latest NVIDIA Holoscan Sensor Bridge repo, ask which supported devkit is being used, configure the host per platform, build the correct demo container, run it, and verify HSB connectivity by pinging 192.168.0.2. Use for Holoscan Sensor Bridge setup, build, container launch, and first-connectivity bring-up.

Execute QA test plans on Holoscan Sensor Bridge hardware. Reads a user-provided test document, filters tests by the user's setup, determines which tests can run automatically, executes them with pass/fail evaluation, and produces a structured test results report.

Flash the FPGA on an HSB board connected to an NVIDIA devkit. Supports HSB Lattice boards (FPGA versions 2407, 2412, 2507, 2510) and Leopard Imaging VB1940 "all-in-one" cameras (FPGA versions 2507, 2510). Uses release-specific YAML manifests and board-type-specific program commands. Lattice and VB1940 commands must never be mixed.

Discover and run Holoscan Sensor Bridge example applications on a connected devkit. Filters available apps by the user's platform, HSB software version, board type, and sensors. Supports timed execution, failure analysis, code-edit suggestions, and iterative re-runs.